With modern weather reception and analysis tools we can plan our cruises and voyages as much as two weeks ahead. John shares how.
Most discussions about weather reception and analysis in the cruising community end up focused on the tools and technology. But that’s not what matters. In fact, planning fun and safe cruises is all about how we USE the tools and THINK about weather. That’s just what this chapter, based on some 25 years of real cruising experience, is about.
Some years ago Colin and John explored whether or not a seamanlike offshore boat could be had for less than US$100,000. Colin and Louise have just proved we can, but there are things to know.
A follow-up, with some significant changes, to our article on a failed Spade anchor.
Which hardware and software should we use for weather downloading and analysis? Lots of good stuff out there. Here’s how to choose.
Very few boats have a good automated bilge pump and flooding alarm system. Let’s fix that.
When an anchor many of us have come to trust over two decades fails catastrophically, it’s time to think about why and what we can learn.
It’s comforting to believe that weather forecasts are always right, but we all know that’s not true. Here’s how to assess the chances that a given forecast will be wrong in a bad way.
John explains one of the most important criteria for selecting an offshore voyaging boat, and one of the most ignored.
Colin and Louise serve up a master class on delivering an older and long-unsailed boat through difficult waters and adverse weather, and even have fun doing it.
So far in this series of chapters we have been looking at the benefits and drawbacks of the renewable options. Now let’s pull it all together.
Can we replace diesel fuel generation (main engine or separate) with wind, solar and/or hydrogenerators? Yes, but there’s stuff to know to avoid wasted money and disappointment.
It’s tempting to think that the more cool stuff a boat has, the better she is for cruising, but that approach can make the boat slow and uncomfortable. Eric explains how to tell when adding gear has gone too far.
The final cockpit reveal, discussing the improvements made since Version 1, including new and very cool renderings.
Colin is waiting for the weather, as happens to all cruisers, and muses on the history of an iconic port, boat design (old and new), derelict boats, and the ongoing process of getting in tune with their new-to-them She 36.
Does buying a Watt & Sea make sense? It’s complicated, depending on boat size and type, as well as usage profile.
After many hours of toil in the boatyard to make her passage-ready, Colin and Louise start the long passage home to Scotland, testing the boat and gear as they go.
A diesel engine that’s been badly overheated will probably never run reliably again. A total cruise ruiner. Let’s not let that happen to us.
Colin shares his safety checks and upgrades made before the long delivery passage home to Scotland.
Choosing fire extinguishers for a cruising boat is a lot more complicated than it may appear. Here’s what Phyllis and John ended up with after consulting experts.
Figuring out where to mount and how to secure a liferaft can be one of the most vexing problems in offshore boat preparation.
Colin continues the story of making a basically sound, but nearly half-a-century-old, boat ready for sailing. Vital reading for anyone buying a used boat.
Further refinements to the mast climbing system we figured out last year. Even after 50 years of climbing masts, we are still learning.
John shares which raft he and Phyllis would buy for various cruising scenarios and why.
So far in this series we have got deep into the technical weeds of how autopilots work, and how to make them work better. Now let’s look at some simple tips, several of which will help with vane gears too.
It’s tempting to just shop for the “best” liferaft, but it’s way smarter to think first about why we are buying one.
How to set gain, counter-rudder, and trim to make an offshore passage faster and more comfortable, and save battery, too.
Now Colin and Louise have found and bought their new boat, the real work begins…but they got the basics right. Here’s how.
Maxime and Vincent have been hard at work over the last couple of months refining and improving the Adventure 40 deck design. Let’s take a look.
We can make a huge difference to comfort, speed, and electrical use by manually adjusting our autopilots.
How smart and expensive an autopilot do we need for offshore shorthanded cruising? Lots of options. Here’s how to make sure we don’t select the wrong one and that we get what we paid for.
Comparing fore-reaching to heaving-to and streaming a Jordon Series Drogue as storm survival strategies as well as equipment and techniques required for safe fore-reaching.
After two years of diligent searching, one of the most knowledgeable boat buyers anywhere has selected his next offshore cruising boat, and an attainable one, too.
Many cruisers have already made the jump to lithium. But what if we would like to delay the considerable expense and complications of lithium, but want to be ready at a later date?
Trucking a boat can be a viable, and in some cases less expensive option than sailing her, but what are the pitfalls?
A recommended kit that weighs less than sixty pounds and tool budgets for coastal and offshore cruising, as well as refits.
A hair-raising account of a boat-lift collapse and tips to reduce the chances of this happening to us.
In the last interior arrangement reveal article we covered the galley, head, and storage areas aft. Now let’s move forward into the salon and forward cabin.
It’s easy to assume that the bigger the battery bank and solar array the better, but there’s a much better way to optimize the system for a live-aboard cruising boat, which will save a bundle of money too.
Up to now in this series we have been looking at going up the mast in sheltered water, but when we need to go up offshore everything gets hugely more difficult and risky. As usual, preparation is the key to safety and success.
A good galley, storage, and head layout are much of what makes an offshore live-aboard cruising sailboat great. The A40 design nails these requirements.
Boats are not square so it’s often necessary to mount gear at an angle and/or on a curved surface. Here’s the easy way to do that.
John highlights four more dangerous mistakes he has made and seen many others make too. With these mistakes fixed, he is now reasonable happy with his system.
From time to time we get a question asking us to opine on whether a modification to the boat or rig will be strong enough. Let’s look at that.
After over 50 years of going up masts John shares the system he and Phyllis are now using as well as highlighting the many dangerous mistakes he has made over the years.
Thoughts on backup systems, fall arrest as against fall prevention, and gear recommendations for going up the mast.
In the last Adventure 40 article, I examined hull, cockpit and rig. Now let’s move out of the cockpit and go forward.
Matt brings his professional engineer’s understanding of forces and his construction site fall-arrest training to bear on one of the most potentially dangerous tasks we sailors are called upon to do.
Ten years after starting a project to create a safe, reliable and fast offshore cruising sailboat ready to go around the world, we have a design.
Part 2 of a buyer’s guide examining the trade-offs between the three ways to set, strike and furl a mainsail on an offshore cruising boat.
Part 1 of buyer’s guide examining the trade-offs between the three ways to set, strike and furl a mainsail on an offshore cruising boat.
Cross-bank battery charging with DC/DC chargers or alternator-to-battery chargers.
A well set up cruising boat electrical system separates the house and engine start batteries. Here’s how to make sure both are properly charged.
We all know that any cruising boat should have the engine and house banks separated, but that’s just the start of what we need to know.
Charging batteries fast has all kinds of benefits: less engine wear, fuel savings, less carbon. But how far can we go?